null

OSI Gen 2 Alarm Wireless Door/Window Sensor 2-pack

(No reviews yet) Write a Review
Reg $59.98
$49.99
(You save $9.99 )
SKU:
OSI-ALM-CS-G2-2PK
Availability:
usually ships within 1 business day
custom_code:
OSI-ALM-CS-G2-2PK
OSI Contact Sensor for Windows and Doors (Model: OSI-ALM-CS-G2)

Also available at Amazon USAAlso available at Amazon Canada

Expand your OSI Smart Alarm System Gen 2 effortlessly by adding more OSI Gen2 Door/Window Sensors. You can add up to 160 Contact Sensors, Motion Sensors and Wireless Strobe Sirens (as long as all the accessories total 160).No need for complicated wiring—simply stick it on your door or window with the provided adhesive. With this sensor, you can enhance security for all entry points, including your front, garage, and back doors. Need installation tips? Check out our easy-to-follow video guide below! 

Accessories



(No reviews yet) Write a Review

Expand your Alarm System!

Enhance your home security with OSI Gen2 PIR Contact Sensors, designed to seamlessly integrate with your OSI Smart Wireless Alarm System. Versatile for use on doors, patio doors, and windows, these sensors offer long-lasting battery life of up to 5 years without replacement. With the upgraded antenna in the Gen 2 model, enjoy stronger transmission for precise and rapid response times, ensuring reliable protection for your home.

Rapid Response

The OSI Contact Sensor Gen 2 swiftly activates upon door or window opening when the alarm system is armed, triggering the entire security setup. Its rapid response ensures quick detection of unauthorized entry, enhancing overall security effectiveness.

Versatile Installation

Contact sensors provide flexible installation choices, accommodating various configurations as long as there is a minimum half-inch separation between both sides. The functionality is confirmed when the red light illuminates upon opening or closing the door, indicating proper operation.

Works with OSI Alarm System Gen 2

Connect these contact detectors to the OSI Smart Alarm System (Gen 2) to form an effective standalone Security system for your house, apartment or small business! You can connect up to 160 accessories in total. *accessories include Motion Sensors, Contact Sensors and Wireless Sirens. You can connect as many of each of these accessories as long as it totals 160 pieces.

Easy to Pair

1. Select Connections Settings on Alarm Display

2. Select "+" on top corner of screen

3. Select Contact Sensor

4. Select Mode (typically Away/Home) meaning the sensor will be active when you HOME ARM & AWAY ARM. You can rename the sensor from the Smart Life app.

4. Select Pair

5. Trigger the Contact Sensor (either place both sides of the contact sensors together or pull apart)

 

Done!

Contact Sensor Installation Video

Watch the video below to learn how to easily install this contact sensor as well as best placement tips and do's and don'ts

Install in Seconds!

Step 1: Remove Tabs

Remove back cover of sensor by pressing down and to the side. Then simply remove the 2 plastic tabs.

Step 2: Peel off 3M Backing

Peel off the 3M backing off the back side of the 2 sensor sides.

Step 3: Place on Door/WIndow

Mount either the Contact Sensor on the door or window, and the magnet on the frame, or switch them around.

What's Included?

2x Door-Window Sensors (can be used for either a door or window)
1x Manual
3M Adhesive

2 x 2450 Coin Batteries

Specifications

Battery specification: CR2450×2
Quiescent current: ≤1uA
Wireless parameters: 433MHz, eV1527
Operating temperature:-10°C ~+50°C
Dimension: 70×31.5×15.5mm (large), 70×11×13.5mm (small)

Features

With dual function of emergency switch & magnetic door 
Low power consumption, long battery life
Low voltage fault monitoring reports
Door open alert

Reviews

(No reviews yet) Write a Review
3 Reviews
Reg $119.99
$79.99
(You save $40.00 )
Add to Cart