null

OSI Signal Repeater

(No reviews yet) Write a Review
$59.99
SKU:
OSI-ALM-SIGREP-CA
UPC:
754194958493
Availability:
usually ships within 1 business day
custom_code:
OSI-ALM-SIGREP

Also available at Amazon USAAlso available at Amazon CanadaAlso available at Amazon USAAlso available at Amazon Canada

*Currently not available on Amazon Canada or Walmart USA

 

Give your Alarm Sensor Signal a BOOST!

The OSI Signal Repeater works with the OSI Wi-Fi Alarm System which enhances the weak signal coming from the wireless sensors. This device extends the transmitting distance of the sensor signal up to 300 meters in open spaces and 30 meter's indoors. This allows for sensors to be installed at farther distances or areas where there are multiple barriers, walls and concrete which weakens the transmission signal. This will also solve the issue where metal or aluminum frames of doors, windows or patio doors block or weaken the signal coming from the contact sensors. The repeater receives the sensor signal and simultaneously transmits the same signal to the OSI Alarm Panel OSI Signal Repeater will work with other name brand 433MHz based alarm panels with the same encode IC code.

  • Compatible with OSI Wi-Fi Alarm System, OSI Wi-Fi Mini Alarm System and Wireless Accessories
  • Transmits sensor signal up to 300M in open spaces and 30M indoors
  • Use with up to 100 sensors
  • Pairs with OSI Alarm Remotes, Contact Sensors (window/door) and Motion PIR Sensors
  • Works with other brand 433mhz based Alarm System panels & sensors
  • Plugs into Wall Outlet
  • Allows you to place sensors at father distances or in places where the signal is weakened by too many walls and barriers (including concrete) as well as fixes the issue of the the aluminum frame from the Patio door/ Window causing the wireless contact sensor signal to be weakened 
OSI Wifi Alarm System Window and door sensors

 

Small and easy to use!

The OSI Signal Repeater is only 3.5" High x 3.5 Wide x 1.5" Deep! The Antenna is long enabling it to boost the signal and reach extremely far!

OSI Wifi Alarm System Window and door sensors

 

Wall Mounted!

For best results choose a spot closest to the sensor that has issues. Mount it on the wall near an electrical outlet closest to that sensor.

OSI Wifi Alarm System Window and door sensors

 

Plugs in to electrical outlet

  • The OSI Signal Repeater plugs into the included 12V DC Power Supply
  • The Learning button is also located on the bottom. This is used for pairing with Sensors / Remotes

 

OSI DIY Wifi Alarm System
 

Boost the weakened sensor signal caused by metal door or window frame!

This will also solve the issue where metal or aluminum frames of doors, windows or patio doors block or weaken the signal coming from the contact sensors. This is because the metal can sometimes interfere with the magnetic field of the magnet. By placing the OSI Signal Repeater close to the sensor that has this issue, it will receive that weakened signal and boost it strong enough for the OSI Alarm Panel or Alarm hub to receive that signal. It can even help that original weak signal get through walls, barriers, other electrical disturbances and even some concrete!

 


OSI Wifi Alarm System
 

Boost Sensor Signal Distance!

You should expect approximately 300m (984 ft)in open space (without obstacles) and 30m (98 ft) for indoors, taking into consideration, obstacles like walls or other inteference. Again the type of obstacles will have an effect on the signal strength.

 
OSI Wifi Alarm System

Helps with Issues Caused by Structural Interferences

There are cases when the alarm panel has issues receiving the signal from a door or window sensor due to the location of the sensor or structural interferences that weaken a signal and cannot reach the alarm panel. Walls, barriers or electrical disturbances, especially concrete walls can cause the signal to weaken, this also goes for microwaves or any other electrical device that gives off strong high frequency electrical signals


OSI Wifi Alarm System
 

How the Signal Repeater Works!

  • When the sensor is triggered, the sensor signal will send out a signal
  • the signal is received by the repeater (within 3s-10s) The signal will then be boosted and forwarded (transmitted) with a strong signal to the alarm control panel.
  • The signal is then received by the OSI Alarm Panel or OSI Mini Hub

 

Also, because the camera features motion detection, if there was in fact an intruder in your home you would also have recieved a second a motion detection notification from the OSI Wifi Mini Camera which means it also would have recorded the person entering your property. So, all you have to do is open the Smart Life app and check out the recorded event! Watch this Video to learn more!

 
Wifi Alarm System for apartments

How to Pair Sensor to the OSI Signal Repeater

Plug it in!

Ensure that the repeater is plugged in and the led light indicating that the repeater is ON is lit (3rd led light).

Press & Hold SET Button

Press and hold the SET button with a pen, screwdriver, etc, until the learning indicator flashes (1st led light).

Let go of SET Button

When the learning indicator flashes (1st led light), let go of the SET button

Trigger the sensor:

Immediately trigger the sensor or remote to pair the with Signal Repeater!


Door/Window Sensor: Open a door or window to send a signal to the repeater. If the sensors are not installed, ensure that the sensor parts are together, then pull them apart. The learning indicator will turn off when the repeater receives the signal.


PIR Motion Sensor: Wave your hand in front of the motion sensor to trigger it and it will send a signal to the repeater. The learning indicator will turn off when the repeater receives the signal.


Remote: Press any button on the remote to sent a signal to the repeater. The learning indicator will turn off when the repeater receives the signal.


You can pair a maximum of 100 items with the repeater. Each item (sensor, PIR or remote must be paired individually with the repeater. To do so repeat steps 2, 3 and 4 for each item.

 


OSI DIY Wifi Alarm System Included
 

What's Included?

The OSI Signal Repeater comes with the OSI Signal Repeater and 12V Power Supply (mounting screws not included). It can be used with both the OSI WIFI ALARM SYSTEM and the OSI WIFI MINI ALARM SYSTEM and the SENSORS/REMOTES which come with them.


  • Connect up to 100 sensors/remotes!
  • Transmit up to 30m Indoor / 300m outdoor
  • Transmits through walls, barriers & concrete
  • Transmits through electrical disturbances such as routers and microwaves etc
  • Great for sensors in detached garages/sheds or large homes where its harder for sensors signals to reach the alarm panel/hub
  • Boost weakened sensor signal caused by metal door or window frames where the contact sensors are installed
  • Works with other brand 433mhz based Alarm System panels & sensors
  • Plugs into Wall Outlet
  • Wall Mounted
 


(No reviews yet) Write a Review

Reviews

(No reviews yet) Write a Review